Workbenches and Workholding

When you hear Schwarz or someone harping about how a workbench is a three-dimensional clamping surface, you might wonder why they’re so religious about it. One of the big “rules” is that you should have the front legs flush with the benchtop.

Although I am fond of the idea of rule-breaking, they’re often around for a reason. And here’s why this one is a decent ruleguideline:

That just wouldn’t have been possible without this configuration. It made a really unwieldy task (trimming off the edges of the coffee table top) to a very manageable one with just a handsaw.

So it’s not so much religion, more of an admonishment to prevent you from shooting yourself in the foot in the name of form over function.

More workbench stuff is coming soon. Maybe.

New Dog Holes, More Milled Wood

I’ve been doing a lot of milling and resawing lately. My prototype bookshelf will use the following pieces of yellow-poplar that I dimensioned:

Yeah, I know, it’s not too exciting, it’s just some wood.

This stuff was quite cupped when I started out, so I had to do a lot of work with the scrub plane to get it flat. To do so, I decided to put a second row of dog holes in the workbench so that it would be easier to plane across the grain:

To use them, just add some dogs in the appropriate holes, as shown here by this evil piece of beech:

It’s been working well so far. I’m considering adding one more at the corner so that it really doesn’t have any room to move around, but it’s not important right now.

Why, you ask, is that board evil? Well, it’s from a piece of 8/4 stock, about 11″ wide. To get to the point of resawing it, I had to flatten one face. No problem, except when you don’t hammer in the scrub plane wedge enough. When that happens, the blade can pop out when you’re doing hard work. The overall consequence, then, is minor carnage. Ouch. I lost a few days of shop time from that.

In any case, this board is for another project that I haven’t talked about yet. I’ll post more details on it later.