Because my latest saw handle project is now waiting for me to trim the fastening hardware down to size, I decided to practice sawing tenon cheeks. A lot of them.
Most of these kind of stink, but I got a lot better further on. I was using the 14tpi saw that’s my most recent addition.
So I felt, okay, maybe it’s time to give the mortise and tenon joint another go, to see how much it improved. And proceeded to mess up the first tenon horribly. But the second try at the tenon turned out as intended.
This may be the best one of these joints I’ve done yet, but it’s still a lot less than ideal. My plan now is to go back to the 20tpi dovetail saw for fine sawing like this. One upside of all this practice is that I’m now much better at using the finer saw. The 14tpi saw is far more difficult to control. The blade is too wide for such a fine pitch, and the blade is also very deep. So I’m going to redo the teeth on that one, down to 12tpi or 11tpi.