“It’s been a slow couple of weeks in the shop,” as many blog posts would say. My current project is theoretically a quick one: A simple staked side table to accompany the daybed. In true half-slacker fashion, I already have the top glued up and the board for the legs milled:
(Yes, I used the multiwedge to flatten both halves of the top, and have not yet touched the top again with a plane since glue-up.)
I have a design, and even made a half-scale model/mockup to see if it was reasonable:
I also have a full-size template for the top that I just need to tape up and trace to cut out the top.
So, in theory, there’s just a little bit of measuring, gauging, cutting shapes, leg-making, reaming, and tapering to do before this can be called done. I really don’t know why I’ve been dragging this one out. It’s mostly been a matter of not finding the impetus to go down to the shop.
Ah, such a common refrain.